1. Air Pressure Gauges Offers
  2. sku: 17855427212992663
  3. WIKA 50242423

WIKA 50242423 Npt Bottom Mount Water Pressure Gauge 213.53 2.5 60 1/4

50242423 Wika 213.53 2.5 Inch 60 Psi Pressure Gauge 1/4 Npt Bottom Mount Mpn

( Brand: Wika ), ( Manufacturer Part Number: 50242423 ), ( Part Type: Pressure Mount Gauge ), ( Face Diameter: 2.5 In ), ( Connection Diameter: 1/4 In ), ( Mounting Position: Bottom Mount ), ( Maximum Pressure: 60 Psi )

Review WIKA 213.53 2.5 Inch 60 Psi Pressure Gauge 1/4 Npt Bottom Mount

The **WIKA 5024.24.23 pressure gauge (model 50242423) with a 213.53 mm (8.4") dial face, a 2.5" (63.5 mm) bore, and a 60 psi (4.14 bar) range** is a precision-engineered instrument designed for reliable and accurate pressure measurement in industrial, hydraulic, and pneumatic applications. This robust gauge features a **bottom-mount 1/4 NPT (National Pipe Thread) connection**, ensuring secure and leak-proof installation in tight or confined spaces where traditional top-mount designs may be impractical. The **large 8.4" dial face** provides exceptional readability, allowing operators to quickly and clearly monitor pressure levels even from a distance, reducing the risk of misinterpretation in high-visibility environments. The **2.5" bore** enhances visibility of the needle movement, making it ideal for applications where precision and clarity are critical, such as in hydraulic systems, compressed air networks, or HVAC setups.

Constructed from high-quality materials, this gauge is built to withstand demanding operational conditions, featuring a **durable aluminum or steel case** that resists corrosion and mechanical stress. The **60 psi (4.14 bar) range** makes it suitable for low-pressure applications, such as monitoring air compressors, vacuum systems, or light-duty hydraulic circuits where moderate pressure fluctuations are expected. The **WIKA 5024 series** is known for its **high accuracy ( 2.5% of full scale)** and **long-term stability**, ensuring consistent performance over extended periods without drift or degradation. Additionally, the gauge incorporates a **sealed bourdon tube mechanism**, protecting internal components from contamination and environmental factors, which extends its service life and maintains reliability in harsh industrial settings.

For enhanced safety and usability, the WIKA 5024.24.23 is equipped with a **safety seal** (optional) to prevent tampering and ensure compliance with regulatory standards, making it a trusted choice for applications requiring verification of pressure readings. The **bottom-mount design** not only optimizes space utilization but also minimizes the risk of accidental damage from external impacts, as the gauge is less exposed to physical stress during installation or operation. Whether integrated into a control panel, mounted on a hydraulic reservoir, or installed in a compressed air system, this gauge delivers **unmatched precision, durability, and ease of maintenance**, making it an indispensable tool for engineers, technicians, and operators who demand dependable pressure measurement solutions.

### **Pros and Cons of buying a WIKA 5024.24.23 Pressure Gauge (2.5" Dial, 60 PSI, 1/4" NPT Bottom Mount)**

#### **Pros:**

1. **Reliable Brand Reputation** WIKA is a well-established manufacturer known for precision-engineered pressure gauges with high accuracy and durability. Their products are widely used in industrial, automotive, and HVAC applications, ensuring reliability in critical systems.

2. **High Accuracy and Precision** The gauge is designed with a bourdon tube mechanism that provides consistent readings within its specified range (0 60 PSI). This makes it suitable for applications where precise monitoring is essential, such as in compressed air systems, refrigeration, or low-pressure hydraulic setups.

3. **Durable Construction** The 2.5-inch dial offers good visibility, and the stainless steel or high-quality metal casing ensures resistance to corrosion, vibration, and temperature fluctuations. The bottom-mount design (1/4" NPT thread) allows for secure installation in tight spaces or where vertical mounting is preferred.

4. **Wide Application Versatility** The 60 PSI range is suitable for low-pressure applications such as:

- **HVAC systems** (refrigeration, air conditioning)

- **Compressed air lines** (pneumatic tools, blowers)

- **Hydraulic systems** (light-duty fluid power)

- **Automotive and industrial testing**

5. **Easy Installation and Maintenance** The 1/4" NPT bottom mount simplifies fitting into existing systems, and the gauge s simple design means minimal maintenance requirements. WIKA gauges are known for longevity with proper care.

6. **Certifications and Compliance** WIKA products often meet industry standards (e.g., ISO, ASME, or CE markings, depending on the model). This ensures compliance with safety regulations in many applications.

7. **Clear Readability** The 2.5-inch dial provides ample space for numbers and markings, reducing the risk of misreading pressure levels compared to smaller gauges.

---

#### **Cons:**

1. **Limited Pressure Range** The gauge is rated for only up to 60 PSI, which may be insufficient for high-pressure applications (e.g., heavy-duty hydraulics, steam systems, or automotive fuel injection). If your system operates near or above this range, the gauge could fail or provide inaccurate readings.

2. **Potential for Condensation or Moisture Damage** If used in environments with high humidity or where moisture can enter the connection (e.g., outdoor or unprotected installations), condensation inside the gauge could affect accuracy or lead to corrosion over time. A drain valve or proper sealing may be needed.

3. **Cost Relative to Basic Gauges** While not excessively expensive, WIKA gauges are priced higher than generic or no-name brands. For very low-budget applications, cheaper alternatives (e.g., from local suppliers) might suffice, though with potential trade-offs in quality.

4. **Single Connection Type** The 1/4" NPT bottom mount may not be compatible with all systems. If your setup requires a different thread size (e.g., 1/2" NPT, BSP, or flanged connections), an adapter may be needed, adding complexity.

5. **No Built-in Overload Protection** Bourdon tube gauges like this one can be damaged by sudden pressure spikes exceeding their range. While they are designed to handle minor overpressurization, repeated or severe spikes could cause permanent damage.

6. **Limited Customization** Unlike some industrial gauges, this model may not offer additional features such as remote sensing, electrical output, or special coatings for aggressive fluids. Customization options are minimal compared to high-end industrial variants.

7. **Potential for Glass Breakage** The dial s glass window can crack or shatter if subjected to extreme temperature changes, impacts, or internal pressure spikes. This is a risk with all bourdon tube gauges and requires careful handling.

---

### **Conclusion:**

The **WIKA 5024.24.23 pressure gauge** is an excellent choice for **low-pressure applications (up to 60 PSI)** where **accuracy, durability, and brand reliability** are priorities. Its 2.5-inch dial ensures readability, and the bottom-mount design offers flexibility in installation. The gauge is well-suited for **HVAC, compressed air, light hydraulics, or automotive diagnostics** where precision matters.

However, it is **not ideal** for high-pressure systems, environments with extreme moisture or temperature fluctuations, or applications requiring specialized features (e.g., remote sensing). If your system operates near the 60 PSI limit or in harsh conditions, consider:

- A **higher-range gauge** (e.g., 100 PSI or 150 PSI) if occasional spikes are possible.

- A **drain valve or protective housing** if moisture is a concern.

- **Overpressure protection** (e.g., a pressure relief valve) to safeguard the gauge.

For most **low-to-medium pressure monitoring needs**, this WIKA gauge is a **strong, dependable purchase** that balances cost, performance, and longevity.

---

### **Recommendation:** **Buy this gauge if:**

- You need a **reliable, accurate 60 PSI pressure gauge** for **HVAC, compressed air, or light industrial use**.

- You prioritize **brand reputation and durability** over ultra-low cost.

- Your system **does not experience frequent pressure spikes** above 60 PSI.

- You prefer a **bottom-mount design** for space efficiency.

**Avoid this gauge if:**

- Your system requires **pressures significantly above 60 PSI** (e.g., >100 PSI).

- You operate in **extreme environments** (e.g., high humidity, temperature swings, or corrosive fluids) without additional protection.

- You need **specialized features** (e.g., remote sensing, electrical output).

- You are on a **tight budget** and can find a similarly rated gauge from a trusted generic brand at a lower price.

For most **general-purpose low-pressure applications**, this WIKA gauge is a **solid, long-term investment**. Always pair it with proper installation (e.g., strainers to filter contaminants) and regular calibration checks to ensure optimal performance.

Details:

WIKA 213.53 2.5 60 psi Pressure Gauge 1/4 NPT Bottom Mount MPN 50242423.

part #: 50242423 prices

  • $30.48-$38.76

specifications pressureswitchiz:

  • brand: Wika
  • mpn: 50242423
  • part type: Pressure Mount Gauge
  • face diameter: 2.5 In
  • connection diameter: 1/4 In
  • mounting position: Bottom Mount
  • maximum pressure: 60 Psi

general pressureswitchiz:

  • Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Air Pressure Gauges
  • condition: New Open box

payments pressureswitchiz:

  • wallet: Apple-pay
  • credit card: Discover
  • other

returns pressureswitchiz:

  • policy: No Returns

shipping pressureswitchiz:

  • type: Calculated
  • service: USPS Ground Advantage
  • class: Standard
  • carrier: USPS
  • transit: 4-10 Days
  • cost: $0.00

offer pressureswitchiz:

  • options: Ship-to-home
  • sold: 0
  • started: March 24, 2026
  • availability: In Stock
  • quantity: 1

seller pressureswitchiz:

  • # reviews: 29
  • city: Jackson, Michigan
  • rating: 100.0%
part type: pressure mount gauge, face diameter: 2.5 in, connection diameter: 1/4 in, mounting position: bottom mount, maximum pressure: 60 psi,
category: business & industrial > hydraulics, pneumatics, pumps plumbing > air pressure gauges, sku: 17855427212992663,
Wika 50242423 Is Similar To:
pressureswitchiz logo
2 offers $30.48–$38.76 USD
  • New. Offer #1 priced at $38.76 + $0.00 shipping estimate = $38.76* total. IMS Product Code: 2039237. Manufacturer Part Number: .FREE SHIPPING
  • New – Open box. Offer #2 priced at $30.48 + $0.00 shipping estimate = $30.48* total. WIKA 213.53 2.5" 60 psi Pressure Gauge 1/4" NPT Bottom Mount MPN .FREE SHIPPING

Copyright © pressureswitchiz.com